Firmware

Firmware Update

Firmware Update is used to download application code to the scanner. Application code versions are specific to the scanner. Consult with a sales representative before downloading application code. If needed, application/boot code in the form of a *.mot file can be requested.

To download application code:

• First, be sure that the scanner is connected to the host computer.

• Apply power to the scanner.

• In the Firmware Update dropdown menu, select App Code. This will open a dialog that allows the user to browse for the application code file.

• Navigate to where the application code file (a *.mot file) is located on the host computer.

• Allow approximately a minute for firmware to download.

As the application code begins to download, the scanner will be silent, the LEDs will flash intermittently, and a progress indicator at the bottom of the ESP window will show when the download is complete.

Caution: Do not interrupt power or disconnect the host cable while download is in progress.