Output 1 Parameters

Output On

Serial Cmd:	<K810,output on,output state,pulse width,output mode>
Default:	Mismatch or No Read
Options:	0 = Mismatch or No Read 1 = Match or Good Read 2 = Mismatch 3 = No Read 4 = Trend Analysis 5 = Validation 6 = Diagnostic Warning 7 = In Read Cycle 8 = Read Cycle Data Valid

Output State

Serial Cmd:	<K810,output on,output state,pulse width,output mode>
Default:	0 = Normally Open
Options:	0 = Normally Open	1 = Normally Closed

Pulse Width

Serial Cmd:	<K810,output on,output state,pulse width,output mode>
Default:	50 (50 ms)
Options:	1 to 65535 (in 1 ms increments)

Output Mode

Serial Cmd:	<K810,output on,output state,pulse width,output mode>
Default:	0 = Pulse
Options:	0 = Pulse
	1 = Latch Mode 1 (Unlatch Input 1 Pin)
	2 = Latch Mode 2 (Unlatch Opposite Condition)
	3 = Latch Mode 3 (Unlatch Re-Enter Read Cycle)