Shutter Speed

Definition:	Unless an application is a static setup, the shutter speed setting should be configured by the user based on the application. For dynamic applications, the user should configure the shutter speed setting so the calibration process can optimize the gain for that setting.
Serial Cmd:	<K529,gain,shutter speed,focus position,symbol type,WOI framing,WOI margin,line scan height,processing>
Default:	Disabled
Options:	0 = Disabled	1 = Enabled
	2 = Fast Shutter

Note: The following table shows general guidelines for shutter speed configurations based on various line speeds. The configurations shown depend on the imager's optical configuration, and on symbol element size.

Shutter Speed	Line Speed
0 - 250	static
250 - 750	5" / sec
750 - 1500	10" / sec
1500 - 2000	15" / sec
2000 - 2500	20" / sec