Multisymbol

Usage:	Multisymbol is commonly used in shipping applications where a shipping symbol contains individual symbols for part number, quantity, etc. This feature allows on trigger to pick up all the symbols.
Definition:	Multisymbol allows the user to define up to 100 symbols that can be read in a single read cycle.
Conditions:	The following conditions apply: Each symbol must be different to be read, unless in Rapid Capture Mode, configured for "triggered capture". The maximum number of characters in a read cycle is 3,000 for all symbols. All No Read messages are posted at the end of the data string, unless output filtering is enabled. If more than one symbol is within the field of view at the same time, symbol data may not be displayed in the order of appearance. If Matchcode Type is set to Sequential or if Trigger is set to Continuous Read 1 Output, the imager will behave as if Number of Symbols were set to 1, regardless of the user-defined configuration.

Number of Symbols

Definition:	Number of Symbols is the number of different symbols that can be read in a single read cycle.
Serial Cmd:	<K222,number of symbols, multisymbol separator>
Default:	1
Options:	1 to 100