![]() ![]() |
Microscan HID IN Reports
HID Reports are used as a channel for standard Microscan Imager communication, command input, and symbol data output. There are two types of Microscan HID Reports:
Report Type Data Content Microscan HID IN (Imager to host) Symbol data; No Reads; Service messages Microscan HID OUT (host to Imager) Commands; serial triggers
Note: The Imager is always able to receive commands and serial triggers from the host through Microscan HID OUT Reports, regardless of the Microscan HID IN Report status. If the Imager receives a command that requests a response, such as a part number query, the Imager will send a Microscan HID IN Report regardless of the IN Report status.
Serial Cmd: <K149,Microscan HID IN Report status,Keyboard IN Report status> Default: 1 Options: 0 = Disabled 1 = Enabled
Microscan HID IN Reports Enabled
When this feature is enabled, the Imager will send Microscan HID IN Reports to the host, containing data originated by the Imager.
Microscan HID IN Reports Disabled
When this feature is disabled, the Imager will not send Microscan HID IN Reports to the host, containing data originated by the Imager.
![]() ![]() |