|
In Continuous Read, trigger input options are disabled, the Imager is always
in the read cycle, and it will attempt to decode and transmit every
capture. If a single symbol stays within read range for multiple
read cycles, its data will be transmitted repeatedly until it
leaves the read range.
The Imager sends replies to serial commands
that require responses when symbol data is transmitted, or read
cycle timeout is enabled and a timeout occurs and at least one captured
image has been processed. Depending on the combination of enabled
symbologies and the Threshold Mode setting, the Imager may take
longer than the timeout to process a captured image.
Note: When to Output and No Read options have no affect on Continuous Read.
|
