![]() ![]() |
Setting Up the Imager for EZ Trax
If you are using EZ Trax software, it is important to set up the MS-4 correctly before beginning.
Click the Read Cycle button to display the Read Cycle tree control.
![]()
Set Trigger Mode, <K200>, to External Edge.
![]()
Set Capture Mode, <K241>, to Rapid Capture.
![]()
Once these Read Cycle parameters are set, you will be ready to connect to EZ Trax. For a description of how to configure EZ Trax using serial commands or ESP, see Configuring EZ Trax Output in I/O Parameters.
For more detailed information about using EZ Trax, refer to the Help menu in EZ Trax software, or the EZ Trax Quick Start Guide, available on the Microscan Tools CD.
![]() ![]() |