Static Presentation Mode

Static Presentation Mode is used in conjunction with Continuous Read Mode: <K200,0>.

When operating in Static Presentation Mode, the red LEDs will illuminate while the Imager is searching for a symbol in Continuous Read Mode. When a symbol is placed in the field of view and a good read occurs, the green LEDs will illuminate and stay on for the duration of time set in Green Flash Duration. Only one read will occur during that time unless more than one symbol is enabled in Number of Symbols.

Note: If Static Presentation Mode is selected but the Imager is not in Continuous Read, the Green Flash will not occur.

To use Static Presentation:

• Enable Continuous Read.

• Select the number of symbols.

• Enable Static Presentation in Green Flash Mode.

• Select the read time in Green Flash Duration.