PreviousNext

Beeper

Usage:
An audible verification that either a good read or a No Read has occurred.
Definition:
A beep is emitted after each good read or No Read.
Serial Cmd:
<K702,beeper status>
Default:
Good Read
Options:
0 = Disabled
1 = Good Read
2 = No Read

Note: The beeper will also sound at any of the following times:

  • When the Imager is defaulted.
  • When a send/save command is sent from ESP.
  • At the conclusion of a calibration procedure.
  • When a <Z>, <Zp>, <Zrd>, or <K701,,1> command is sent.
PreviousNext