Serial Command Beep Status

Usage:	Used to audibly verify the acceptance and validity of a command.
Definition:	Causes the Imager to beep once whenever a K command is entered to indicate that the command was accepted and processed.
Function:	If an invalid command is entered, the Imager beeps 5 times to indicate an invalid entry. However, this does not necessarily mean that all data fields have been entered incorrectly. Only one bad field needs to be found in order to activate the 5 beep response.
Serial Cmd:	<K701,serial command echo status,serial command beep status, control/hex output>
Default:	Disabled
Options:	0 = Disabled	1 = Enabled