Database Mode

Switch Mode

Definition:	Selects the event that causes the Imager to load the next database entry to current, active settings. When Frame Count/Time expires and Image Process Looping is enabled, the next database entry with modifications to camera settings will be used. Note: The image capture event always occurs when the first database entry is used. Note: The Switch Mode setting has no effect on Rapid Capture Mode, which always operates in Number of Image Frames mode with a frame count of 1.
Serial Cmd:	<K256,switch mode,frame count/time,image process looping,image dimensions>
Default:	1
Options:	0 = Time	1 = Number of Image Frames

Time

When Switch Mode is set to Time, the Imager will load the next database entry to current, active settings after a predefined time interval. The timer will start upon use of a database entry. If the timer expires during an image capture event, the timer will not start again until that database entry has been incremented and the new database entry has been loaded to current, active settings.