Focus Position

Definition:	Since focus can be configured by entering the target distance from the imager's parting line, the user will normally configure the focus setting without needing to calibrate. However, if it is necessary to calibrate the focus distance, there are two methods for doing so: the standard "Search Method", or a "Quick Focus" method.
Serial Cmd:	<K529,gain,shutter speed,focus position,symbol type,WOI framing, WOI margin,line scan height,processing>
Default:	Quick Focus
Options:	0 = Disabled
	1 = Enabled (Search Method)
	2 = Quick Focus

Disabled

When this feature is disabled, the focus position is fixed and is not part of the calibration process.