Note:Large
Intercharacter Gap is not supported when Q-Mode is enabled.
Usage:
Large Intercharacter Gap is helpful for reading symbols
that are printed out of specification.
Important: Do not use
Large Intercharacter
Gap with Narrow
Margins enabled, because a large intercharacter gap (over 3x)
could cause a narrow margin (5x) to be interpreted as an
intercharacter gap.
Definition:
When enabled, the imager can read symbols
with gaps between symbol characters that exceed three times (3x)
the narrow element width.
Serial Cmd:
<K470,status,check character status,check character output
status,large intercharacter gap,fixed symbol length status,fixed
symbol length,full ASCII set>