PreviousNext

Codabar

Usage:
Used in photo-finishing and library applications. Previously used in medical applications, but not typically used in newer medical applications.
Definition:
Codabar is a 16-bit character set (0 through 9, and the characters $, :, /, ., +, and -) with start/stop codes and at least two distinctly different bar widths.
Serial Cmd:
<K471,status,start/stop match,start/stop output,large intercharacter gap,fixed symbol length status,symbol length,check character type,check character output>
Default:
Disabled
Options:
0 = Disabled
1 = Enabled

Start/Stop Match (Codabar)

Definition:
When disabled, the imager will decode Codabar symbols whether or not the start and stop characters are the same.
When enabled, the imager will not decode Codabar symbols unless the start and stop characters are the same.
Serial Cmd:
<K471,status,start/stop match,start/stop output,large intercharacter gap,fixed symbol length status,symbol length,check character type,check character output>
Default:
Enabled
Options:
0 = Disabled
1 = Enabled


PreviousNext