Beeper Usage: An audible verification that either a good read or a No Read has occurred. Definition: A beep is emitted after each good read or No Read. Serial Cmd: <K702,beeper status> Default: Good Read Options: 0 = Disabled 1 = Good Read 2 = No Read Note: The beeper will also sound at any of the following times: When the imager is defaulted. When a send/save command is sent from ESP. At the conclusion of a calibration procedure. When a <Z>, <Zp>, <Zrd>, or <K701,,1> command is sent.
Note: The beeper will also sound at any of the following times: