Latch Mode 3 (Unlatch Re-enter Read
Cycle)
The programmable output is active when the Output
On condition has been met and is held active until a new read cycle
begins.
Note: All of the Output On modes are inhibited
when any Output on
Warning is active for Output 1.
Trend Analysis Output 1
Note: Output
On under Output 1
Parameters must be set to Trend Analysis for this output to function.
Under Output 1 Parameters, expand the Trend Analysis tree:
Usage:
|
Useful in cases where the user doesn't want to shut down
for one condition but wants to monitor quality and read
conditions.
|
Definition:
|
Applies Trend Analysis settings to Output 1.
With Trend Analysis, the user can track the occurrences and
frequency of mismatches, No Reads, and the number of reads per
trigger, and output the results to any of three outputs.
|
Example:
|
Trend Analysis Mode = No Read
Trigger Evaluation Period= 25 triggers (read
cycles)
Number to Output On = 4
In this example, the imager will activate an
output when 4 No Reads occur within a period of 25 triggers (read
cycles).
|