Visionscape PCIe Digital I/O Boards

Extended discrete digital I/O is provided for GigE/PC based systems by two PCIe (PCI Express) add-in boards. These boards both provide 16 channels in and 16 channels out of optically isolated I/O at 24 volts nominal signal level.

The DIO board should be specified according to the requirement of the installation concerning the electrical interface to equipment such as PLCs or sensors.

These boards are PCI Express bus-compliant interface board used to provide a digital signal I/O function on a PC. They product can input and output digital signals at 12 - 24VDC.They provide 16 opto-coupler isolated inputs and 16 opto-coupler isolated outputs with digital filter function to prevent wrong recognition of input signals and output transistor protection circuit for surge voltage protection and over-current protection).

Both DIO kits are supplied with a 1.5m cable (Shielded Cable with two 37-pin D-Sub Connectors) for connection to a 32 DIN rail mount terminal strip, the dimensions of which are shown below.

Part Number	Description
98-000130-01	DIO Kit, Current Sinking Configuration, VS GigE I/O (NPN) (L)
98-000142-01	DIO Kit, Current Source Configuration, VS GigE I/O (PNP) (RL)

	98-000142-01 (Sourcing)	98-000130-01 (Sinking)
Input Format	Opto-isolated input (Compatible with current source output) (Negative logic *1)	Opto-coupler isolated input (Compatible with current sink output) (Negative logic *1)
Number of Input Signal Channels	16 channels (all available for interrupts)(One common)
Input Resistance	4.7k?
Input ON current	2.0mA or more
Input OFF Current	0.16mA or less
Response Time	Within 200?sec
Output Format	Opto-isolated output (Current source type) (Negative logic *1)	Opto-coupler isolated open collector output (current sink type) (Negative logic *1)
Number of Output Signal Channels	16 channels (One common)
Output Voltage	35 VDC (Max.)
Output Current	100mA (per channel) (Max.)
Residual Voltage with Output On	0.5V or less (Output current ? 50mA), 1.0V or less (Output current ? 100mA)
Surge Protector	Zener diode RD47FM (NEC) or equivalent
Response Time	Within 200?sec
External Circuit Power Supply	12 - 24VDC (±10%)
Power Consumption	3.3VDC 350mA (Max.)
Operating Conditions	0 - 50°C, 10 - 90%RH (No condensation)
Bus Specification	PCI Express Base Specification Rev. 1.0a x1
Dimension (mm)	121.69(L) x 110.18(H)
Connector	37 pin D-SUB connector (female) DCLC-J37SAF-20L9E (JAE) or equivalent
Weight	90g	130g