Strobe and Trigger Connector

The standard I/O connector consists of one optoisolated input "Trigger" and one optoisolated output "Flash".

Figure A-2 shows the pinout of the strobe and trigger connector.

FIGURE A-2. 

Strobe and Trigger Connector

Table A-3 lists the supplier for the strobe and trigger connector mating cable.

TABLE A-3. Serial and Secondary I/O Connector Mating Cable

Supplier	Part Number	Description
Microscan	98-000126-01	Visionscape® GigE Camera Strobe/Trigger M8-4 to Pigtail 5M

Table A-4 describes the strobe and trigger connector signals.

TABLE A-4. Strobe and Trigger Connector Signals

Pin	Signal Name	Description
1	TrigIN+	External Trigger Input +
2	TrigIN-	External Trigger Input -
3	Flash	Flash Output
4	U(ext)	User-Supplied Voltage for Flash Output: 5 to 30VDC (24VDC @ 16ma recommended)

Connector Type: M8/4 (Plug with Male Pins)

Mates with Type: M8/4 (Socket with Female Pins)