PreviousNext

VS-1 Smart Camera

TCP/IP Port Connectivity

When communicating over Ethernet, the camera uses the following predefined ports. The camera establishes connections as a Server and, therefore, listens for Host clients to initiate the connection on a particular port. Any number of clients can connect to the camera, each one with their private peer-to-peer connection and each one monitored by a special *heartbeat* connection on port 49079 (see Table 2-2).

TABLE 2-2. VS-1 Smart Camera TCP/IP Connectivity 

Port Name

Protocol

Number

Note

File Transfer Port
FTP
21
Allows the Host to send and retrieve files from the VS-1 Smart Camera.
Telnet Port
Telnet
23
Console terminal to the Device, runs the vxWorks OS console target shell.
DHCP Client Port
DHCP
68
Supports the assignment of IP addresses from a DHCP server for the VS-1 Smart Camera.
Web Server
HTTP
80
Allow access to boot parameters when HyperTerminal over Serial and Bootloader menu is not convenient.
Routing Port
RIP
520
Receives and updates local routing tables from the Network.
IO Service Port
TCP
49049
Controls IO on the camera, i.e., Physical and Virtual IO and receives IO change notification events back to the client.
Pic and Live Acquire Port
TCP
49050
Takes pictures and goes to Live Video.
Camera RPC Port
TCP
49059
When in control, sends editing and runtime commands to the camera; for example, Start, Stop, Download, Flash, etc...
Connection Monitor Port
TCP
49079
This special connection is created automatically whenever any of the other connections above is made by a client (when using the vskit libraries or by FrontRunner). It monitors the connections and provides a timely mechanism to report connection drops to the client (within a few seconds).
Reports and Statistics Port
TCP
49200
Used by FrontRunner and vskit programming library for camera reports. Reports are defined by the AVP and can include any results with or without images. Connections can be programmed to be lossless, i.e., inline with the Inspection or lossy, i.e., at a particular rate per second.
PartQ Retrieval Port
TCP
49201
Retrieves the reports records stored inline in camera memory.
Reports and Statistics Control Port
TCP
49202
Allow control over a Report Connection, in particular update rate and allows records to be added/removed from the connection.
Serial TCP Ports
TCP
49211
49212
49213
49214
Send Formatted Output Strings serially over TCP as programmed in the AVP by the Formatted Output Step
Camera Login/Command Port
UDP
49493
Gains control to the camera in order to edit and modify its network parameters. A network login to the camera is required to gain control with the VS-1 Smart Camera.
Camera Announce Port
UDP
49495
Broadcasts Smart Camera identity on the current subnet used by Network View in FrontRunner, provides general counters, camera name, IP, IP in control, camera status, and camera software version.


PreviousNext