Mounting Using Front Block

Note: Do not insulate the mounting block. The mounting block of the VS-1 Smart Camera is part of the heat dissipation system, and metal-to-metal contact is required for effective cooling. Refer to Appendix C, "Specifications," for mounting block dimensions.

You can mount the VS-1 Smart Camera using the M4 holes located on the top, bottom, and each side of the front block, as shown in Figure 2-4.

FIGURE 2-4. 

Locations for Mounting Using Front Block

Caution: Using screws that are too long for the threaded holes may damage the VS-1 Smart Camera. The accessory mounting blocks use 10mm machine screws.