VS-1 Smart Camera Connectors

Power and Primary I/O Connector

Figure A-1 shows the pinout of the Power and Primary I/O connector.

FIGURE A-1. 

Power and Primary I/O Connector "X1" - Rear View

Table A-1 lists the supplier for the Power and Primary I/O connector mating connector and cable.

TABLE A-1. Power and Primary I/O Connector Mating Cable

Supplier	Part Number	Description
Microscan	98-HT00-0CP0	Connector Type M12 8 Pin A Coded, Female Cable 10M

Table A-2 describes the Power and Primary I/O connector signals.

TABLE A-2. Power and Primary I/O Connector Signals 

Pin	Short Designation	Direction	Function	Notes
1	OUT1	Out	S/W Programmable	3
2	OUT2	Out	S/W Programmable	3
3	OUT3	Out	S/W Programmable	3
4	Power Input	In	Fused +24V, 1 Amp max.	1
5	Out Common		Output Common	4
6	SENSOR	In	S/W Programmable Trigger	2
7	SENSOR	In	S/W Programmable Trigger	2
8	Power Return	Common	DC Ground	1
Shell

Notes:

• Non-isolated utility power for sensor and/or opto current loops.

• Bipolar isolated camera sensor trigger:

• Logic 0: 0 to 5V

• Logic 1: 15 to 30V

• Rin: 18k Ohms

• Bipolar isolated output switch, Ron = 35 ohm max., Ion < 50ma.,
  Voff < ±50VDC, 60VAC isolation (short circuit protected: 160-240 ma pk.).

• Common wire for Out1, Out2, and Out3 Opto-Isolated outputs.

• Total output current for all opto outputs must not exceed 150ma.