Attaching the BH1/BH2 Battery Handle

The HE40T uses the battery compartment to "snap to" the handle. The BH1/BH2 handle is shown in Figure 1-5. The handle with battery is shown in Figure 1-6

FIGURE 1-5. 

BH1/BH2 Handle

FIGURE 1-6. 

BH1/BH2 Handle with Battery

To attach the handle to the reader:

• Insert the tab on the back of the handle into the reader, as shown in Figure 1-7.

• Snap the reader onto the handle, matching the battery compartment to the battery connectors, visible inside the handle, as shown in Figure 1-7.

FIGURE 1-7. 

Attaching the BH1/BH2 Handle

The HE40T can be secured further with threaded screws on the under side of the handle, as shown in Figure 1-8.

FIGURE 1-8. 

Location of Threaded Screws