Connecting With A QuickConnect Code

If you purchased a CodeXML Bluetooth Modem or a Belkin® Bluetooth adapter from Microscan or from an authorized distributor, a QuickConnect code was included (Figure 1-26).

FIGURE 1-26. 

QuickConnect Code

The QuickConnect code has the information of the Bluetooth address (often a reference to go to the BD_ADDR) of that device. You can usually find the
12-character Bluetooth address somewhere on the device near the device's serial number (Figure 1-26). This code will link your HE40T directly to the desired Bluetooth device.

Note: While installing the Bluetooth Configuration Manager software that was included with your Bluetooth adapter, make sure to note the Virtual COM Port number the software assigned for the adapter (e.g. COM 10). This is the COM Port your HE40T will connect through.

To connect your reader, scan the Reset to Factory Defaults code in Figure 1-27. Then, the QuickConnect Code and your HE40T will automatically connect. You should also scan the Save Settings code if you want to save these settings.

Note: If the HE40T reader powers off without scanning the Save Settings code, you will lose your settings.

FIGURE 1-27. 

Reset to RF Factory Defaults Code