HE40T Feedback

The HE40T features two LEDs on the front of the reader. These LEDs give feedback on different functionality of the HE40T reader. Each LED has a small icon underneath that represents the following:

FIGURE 1-36. 

HE40T LEDs

The HE40T reader will automatically flash battery or power status every 15 seconds. Each LED can show three colors: Green, Amber, or Red. The colors will vary depending on the message the reader is sending:

• Green = 50% - 100% capacity of battery

• Amber = 20% - 50% capacity of battery or 20% - 99% of memory available

• Red = 0% - 20% capacity of battery or no memory available

The HE40T also emits beeps or vibrates for user feedback. Use the information in Table 1-1 and Table 1-2 to better understand your reader's feedback.

TABLE 1-1. Normal Operation Feedback 

	Memory Connection LED	Battery LED	Sound
HE40T Successfully Powers Up	Flash Green	Flash Green	1 Beep
HE40T Successfully Enumerates with Host via USB Cable	None	Solid Green	1 Beep
Attempting to Decode	None	Battery Status	None
Successful Decode and Data Transfer via cable	None	Solid Green	1 Beep
Successful Decode and Data Store	Memory Status	None	1 Beep
Batch Mode Memory Full	Solid Red	None	3 Beeps
Configuration Code Successfully Decoded and Processed	None	None	1 Beep, slight pause, 1 Beep
Configuration Code But Was Not Successfully Decoded and Processed	Flash Red 3 Times	Flash Red 3 Times	3 Beeps

TABLE 1-2. Bluetooth Radio Feedback

	Memory Connection LED	Battery LED	Sound
Attempting to Connect	Flashes Blue	Solid Green	None
Failed to Connect	None	None	4 Beeps
Connected	Flashes Blue every 15 seconds	Flashes Battery Status every 15 seconds	None
Sending Data	Flashes Memory Status	None	None