PreviousNext

Use the programming codes in this chapter to change the symbology settings on the HawkEye™ 40T.

To reset the reader to factory defaults or to save the current settings, scan one of the codes in Figure 3-1 or Figure 3-2:

FIGURE 3-1. 

Reset to Factory Defaults (USB or PS2)

FIGURE 3-2. 

Reset to Factory Defaults (RS-232 or RF One Way)

Readers are shipped from manufacturing with default communication settings that are hardware dependent.

Note: If you do not save your settings, and the HE40T loses power, you will lose your settings.


PreviousNext