Using ESP

This section is designed to help you understand the basic structure and elements of ESP (Easy Setup Program).

When you open ESP, unless otherwise specified in the ESP Preferences dialog accessible from the Options heading on the menu toolbar, you will enter EZ Mode for initial setup. From there, you can enter Application Mode (App Mode) and access several configuration menus (Communications, Read Cycle, Symbologies, I/O Parameters, Symbol Quality, Matchcode, and Diagnostics), a Camera setup interface, a Terminal interface, a Utilities interface, and an Output Format interface.

ESP can be used to configure the MS-4 Imager in three different ways:

• Tree Controls: Each configuration menu contains a list of all option settings that pertain to that specific element of imager operation. For example, the Communications menu shows a Host Port Connections option, and then a list of the sub-options Baud Rate, Parity, Stop Bits, and Data Bits. Each of these sub-options is configurable by using dropdown menus.

• Graphic User Interfaces: Imager settings can be configured using such point-and-click tools as radio buttons, zoom in/zoom out sliders, spin boxes, check boxes, and drag-and-drop functions.

• Terminal: ESP's Terminal allows you to send serial configuration and utility commands directly to the imager by typing them in the provided text field.

Information about using ESP in specific applications is provided in subsequent sections.