|
Definition:
|
When enabled, Command Processing Mode allows commands to be
entered via the auxiliary port and direct externally triggered read
cycle data in one of two ways:
- Bar code data, including the serial trigger (if used), will be
transmitted to the last port from which a command was sent.
- If the last command came from the host port, then externally
triggered read cycle data will only be output to the host
port.
|
|
Serial Cmd:
|
<K101,aux
port mode,baud
rate,parity,stop bits,data bits,daisy chain i.d. status,daisy chain
i.d.>
|
