PreviousNext

EZ Button Configuration

By default, basic calibration can be initiated from the EZ button (3 beeps). Note that this only changes the camera, image processing, and symbology settings of the Imager. To default the USB MS-4, hold down the EZ button during power-on.

Note: This only overwrites Power-On settings with Custom Default settings, as when the <Zrc> command is received. It does not overwrite Power-On settings with Factory Defaults, as when the <Zrd> command is received. If Custom Defaults are misconfigured, another method must be used to default the Imager.


PreviousNext