PreviousNext

Multisymbol

Usage:
Multisymbol is commonly used in shipping applications where a shipping symbol contains individual symbols for part number, quantity, etc. This feature allows on trigger to pick up all the symbols.
Definition:
Multisymbol allows the user to define up to 100 symbols that can be read in a single read cycle.
Conditions:
The following conditions apply:
  • Each symbol must be different to be read, unless in Rapid Capture Mode, configured for "triggered capture".
  • The maximum number of characters in a read cycle is 3,000 for all symbols.
  • All No Read messages are posted at the end of the data string, unless output filtering is enabled.
  • If more than one symbol is within the field of view at the same time, symbol data may not be displayed in the order of appearance.
  • If Matchcode Type is set to Sequential or if Trigger is set to Continuous Read 1 Output, the imager will behave as if Number of Symbols were set to 1, regardless of the user-defined configuration.

Number of Symbols

Definition:
Number of Symbols is the number of different symbols that can be read in a single read cycle.
Serial Cmd:
<K222,number of symbols, multisymbol separator>
Default:
1
Options:
1 to 100


PreviousNext