Number of Captures

Number of Captures

Usage:

Number of Captures is used to specify the number of captures to be processed in Rapid Capture Mode.

Definition:

Sets the total number of captures that are processed during a read cycle in Rapid Capture Mode. This feature is used in conjunction with Capture Timing parameters to specify the capture sequence of a rapid capture read cycle.

Serial Cmd:

<K241,capture mode,number of captures,rapid capture mode,pre-processing>

Default:

1

Options:

1 to 64

Note: The range of maximum number of captures is dynamic. This range is dependent on the maximum image size in the system and the memory configuration of the product. The Quadrus MINI Velocity can support up to 61 full-size 752 x 480 images.

The number of possible captures will increase as image size is reduced, but it cannot exceed 64. This command handles the dynamic range itself, so that if the user enters a value greater than the allowed maximum, the value will be limited to the number of system images. This command also affects the number of stored images that are allowed in the system. If the maximum number is used for the number of captures, the number of allowed stored images will be 0.

Usage:	Number of Captures is used to specify the number of captures to be processed in Rapid Capture Mode.
Definition:	Sets the total number of captures that are processed during a read cycle in Rapid Capture Mode. This feature is used in conjunction with Capture Timing parameters to specify the capture sequence of a rapid capture read cycle.
Serial Cmd:	<K241,capture mode,number of captures,rapid capture mode,pre-processing>
Default:	1
Options:	1 to 64